Home » Faculty » National and International Conferences

National and International Conferences

  • Dr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering Presented a paper on “OPTIMIZATION OF INJECTION PRESSURE ON PERFORMANCE AND EMISSION CHARACTERISTICS OF DIESEL ENGINE USING WASTE COOKING OIL”, in International Conference on Advances In Thermal Engineering and Applications (ICETEA 2021),SRM Institute of Science and Technology, Chennai on March 19 & 20, 2021.
  • Dr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering Presented a paper on “INFLUENCE OF PISTON BOWL GEOMETRY IN COMPRESSION IGNITION ENGINE USING CFD ANALYSIS: A THEORETICAL APPROACH”, in AICTE sponsored International Conference on Advances In Mechanical Engineering (ICAME’21),Sri Sai Ram Engineering College, Chennai on January 27 & 28, 2021.
  • Dr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering Presented a paper on “EXPERIMENTAL INVESTIGATION ON THE PERFORMANCE AND EMISSION CHARACTERISTICS OF DIESEL ENGINE USING WASTE COOKING OIL”, in AICTE sponsored International Conference on Advances In Mechanical Engineering (ICAME’21),Sri Sai Ram Engineering College, Chennai on January 27 & 28, 2021.
  • Dr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering Presented a paper on “OPTIMIZATION OF COMPRESSION RATIO OF A DIESEL ENGINE USING BOIDIESEL”, in AICTE sponsored International Conference on Advances In Mechanical Engineering (ICAME’21), Sri Sai Ram Engineering College, Chennai on January 27 & 28, 2021.
  • Mr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering Presented a paper on “Performance and Emission Characteristics of C.I Engine using Jatropha and Pongamia Mixed Biodiesel”, in 5th International Conference on Materials and Manufacturing Engineering (ICMME 2020),SRI CHANDRASEKHARENDRA SARASWATHI VISWA MAHAVIDYALAYA, Kancheepuram on September 07 & 08, 2020.
  • Mr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering Presented a paper on “Multi response Optimization of Welding Parameters in Dissimilar Plasma Arc Welded Joints Using RSM Based GRA Coupled with PCA”, in 5th International Conference on Materials and Manufacturing Engineering (ICMME 2020), SRI CHANDRASEKHARENDRA SARASWATHI VISWA MAHAVIDYALAYA, Kancheepuram on September 07 & 08, 2020.
  • B.Senthilkumar/Assistant Professor – II, Department of Production Engineering has Presented a paper on “Fabrication and Evaluation of Mechanical Property of Glass Fiber Composites”, in International Conference on Recent Trends in Mechanical and Materials Engineering- ICRTMME 2019, Chennai Institute of Technology on December 13, 2019.
  • P.V.Inbanaathan/Assistant Professor – III, Department of Production Engineeringhas presented a paper titled “Characteristics Investigation on DI Diesel Engine with Nano-Particles as an Additive in Lemon Grass Oil” in “International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility 2019” (ADMMS’19) held at MIT, Chrompet on October 11- 12, 2019.
  • Dr.U.Tamilarasan / Head of the Department and Mr. P. V. Inbanaathan / Assistant Professor – III , Department of Production Engineering Participated in The 8th International Conference on Sustainable Waste Management under the aegis of International Society of Waste Management Air and Water (ISWMAW), Acharya Nagarjuna University, Guntur, AP, India from November 22 – November 24, 2018.
  • Dr.U.Tamilarasan / Head of the Department and Mr. P. V. Inbanaathan / Assistant Professor – III , Department of Production Engineering has presented the poster at The 8th IconSWM under the title “Experimental Investigation Of Performance And Emission Characteristics Of Diesel Blended With Palm Methyl Ester Along With Alumina Nano Additive Using D.I. Diesel Engine” in The 8th International Conference on Sustainable Waste Management under the aegis of International Society of Waste Management Air and Water (ISWMAW), Acharya Nagarjuna University, Guntur, AP, India from November 22 – November 24, 2018.
  • Mr. V.Velmurugan / Assistant Professor – II, Department of Production Engineering has Presented a Poster entitled “Design and Analysis of GPRF-AI Composite material for the Replacement of LPG Cylinder” in the 10th International Conference on Advancements in Polymeric Materials (APM-2019) , Innovations in Polymeric Product Development and Manufacturing , held at CIPET, Guindy, Chennai on January 22-24, 2019.
  • Mr. V.Velmurugan / Assistant Professor – II, Department of Production Engineering has Presented a Paper entitled “The Production Planning Process for an auto Component in the Automobile Industry” in the SERB sponsored International Conference on Recent Developments in Mechanical Engineering (ICRDME2019) held at S.A. Engineering College, Chennai on March 21 – 22, 2019.
  • Mr.M.R.Ashok, M.Manojkumar / Assistant Professor-III , Department of Production Engineering Presented a paper on “Microstructural and Mechanical Behaviour of Friction Stir Welded Magnesium alloy”, National Conference on ADVANCEMENTS IN MECHANICAL, MANUFACTURING AND CIVIL ENGINEERING 2018 (NCAMMCE-18) at M.Kumarasamy College of Engineering, Karur, Thalavapalayam, Tamil Nadu on March 9, 2018
    Mr.M.R.Ashok, M.Manojkumar / Assistant Professor-III , Department of Production Engineering Presented a paper on “Production and Purification of Green Product Liquid fuel from Plastic Waste by Instant Arc Heater”, National Conference on ADVANCEMENTS IN MECHANICAL,
  • MANUFACTURING AND CIVIL ENGINEERING 2018 (NCAMMCE-18) at M.Kumarasamy College of Engineering, Karur, Thalavapalayam, Tamil Nadu on March 9, 2018.
  • Mr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering Presented a paper on “Applications of Wonder Material – A Review on modern application of Graphene”, in Third International Conference on Innovative & Emerging Trends in Engineering and Technology (ICIETET’18) organized by Panimalar Institute of Technology, in association with CSI, IETE, IEEE, ISTE, ICTACT, IET and SAEINDIA on March 9, 2018.
  • Mr.M.R.Ashok / Assistant Professor-III , Department of Production Engineering Presented a paper on “Preparation and Analysis of Enhanced Glass Fiber Reinforced Plastics with Al Base Alloy”, in 18th International Conference on Applied Mechanics and Materials Engineering (ICAMME 2016), Bangkok, Thailand on December 12-13, 2016.
  • Mr.D.Muruganandam / Assistant Professor – I, Department of Production Engineering Presented a paper on “Corrosion Behavior in Friction Stir Welded Plates of AA 2024 and AA 7075”, in International conference on “Mechanical, Materials and Manufacturing systems”(ICMMMS’16),Sri Sai Ram Engineering College, Chennai on February 24 & 25, 2016.
  • Mr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering Presented a paper on “Reducing the manufacturing lead time by modifying the welding process”, in International conference on “Mechanical, Materials and Manufacturing systems”(ICMMMS’16),Sri Sai Ram Engineering College, Chennai on February 24 & 25, 2016.
  • Mr. V.Velmurugan / Assistant Professor – II, Department of Production Engineering Presented a paper on “Characterization of TiNi / Al6061 Based shape memory alloy with N coating”, in International conference on “Mechanical, Materials and Manufacturing systems” (ICMMMS’16),Sri Sai Ram Engineering College , Chennai on February 24 & 25, 2016.
  • Mr.U.Tamilarasan / Head of the Department , Department of Production Engineering Presented a paper on “Mechanical property evaluation of carbon fiber reinforced plastic material”, in International Conference on “Advances in Material and Manufacturing Engineering”(ICAMME’14), Sri Sairam Engineering College, Chennai on December 19 & 20, 2014.
  • Mr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering Presented a paper on “Performance and emission characteristics of a mixed biodiesel fueled C.I engine”, in International Conference on “Advances in Material and Manufacturing Engineering” (ICAMME’14), Sri Sairam Engineering College, Chennai on December 19 & 20, 2014.
  • B.Senthilkumar / Assistant Professor – II, Department of Production Engineering Presented a paper on “Temperature Prediction Using Finite Element Modeling on Friction Stir Welding”, in National Conference on Contemporary Approaches in Mechanical, Automobile and Building Sciences on March 27, 2015 at Karpaga Vinayaga College of Engineering and Technology, Madurantagam Taluk, Kancheepuram District, Tamilnadu.
  • Mr.U.Tamilarasan / Head of the Department , Department of Production Engineering Presented a paper on “Tensile Property Evaluation of Carbon Fiber Reinforced Aluminum Sandwich Composites”, in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014), Ponjesly College of Engineering, Nagercoil on March 7 & 8, 2014.
  • Mr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering Presented a paper on “Optimization of Performance Parameters of A C.I Engine Fueled With Neem Bio Diesel Using Taguchi Technique”, in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014), Ponjesly College of Engineering, Nagercoil on March 7 & 8, 2014.
  • Mr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering Presented a paper on “Weight Distribution In Carousel Storage System Using Programmable Controller”, in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014), Ponjesly College of Engineering, Nagercoil on March 7 & 8, 2014.
  • B.Senthilkumar / Assistant Professor – II, Department of Production Engineering Presented a paper on “Effect of Cryogenic Treatment on the Friction Stir Welding of AA 2021 and 7075 Aluminium alloy”, in Fourth International Conference ICICIC Global on bridges & buildings, computing & Communication, Electricity & Energy, Polymers & Petroleum, Wheels & Wings, Radha Regent, Chennai on December 21 & 22, 2013.