Home » Faculty » Paper Publications

Paper Publications

  • Dr.U.Tamilarasan/Head of the Department and Mr.P.V.Inbanaathan / Assistant Professor – III, Published a paper on “Mechanical Property Evaluation of Banana Jute Fibre Along with Carbon Fibre Epoxy Composite Material” in International Journal of Engineering and Advanced Technology (IJEAT) – SCOPUS INDEXED, ISSN: 2249 – 8958, Volume-8, Issue- 6S3, September 2019.
  • Mr.V.Velmurugan / Assistant Professor – II and Dr.U.Tamilarasan / Head of the Department, Published a paper on “Design and Analysis of GFRP-Al Composite Material for the Replacement of LPG Cylinder” in International Journal of Engineering and Advanced Technology (IJEAT) – SCOPUS INDEXED, ISSN: 2249 – 8958, Volume-9 Issue-1, October 2019.
  • Mr.M.Manojkumar / Assistant Professor – III, Mr.M.R.Ashok / Assistant Professor – III and Dr.U.Tamilarasan / Head of the Department, Published a paper on “LPDE/Alumina Based Bio-Nano Composite Materials for Food Packaging Applications” in International Journal of Recent Technology and Engineering (IJRTE) – SCOPUS INDEXED, ISSN: 2277-3878, Volume-8 Issue-6, March 2020
  • Mr. S. Arunprasad / Assistant Professor – I, Published a paper on “Mechanical Properties of Kevlar Fibre Reinforced With Banana Fibre and Aluminium Mesh using Epoxy Resin” in International Journal of Recent Technology and Engineering (IJRTE)– SCOPUS INDEXED,ISSN: 2277-3878, Volume-8 Issue-5, January 2020.
  • Mr.B.Senthilkumar / Assistant Professor – II, Published a paper on “Design and fabrication of multi-rotor horizontal axis wind turbine” in International Journal of Engineering and Advanced Technology (IJEAT) – SCOPUS INDEXED, ISSN: 2249–8958, Volume-8, Issue-6, August 2019.
  • Mr.M.R.Ashok / Assistant Professor – III, Published a paper on “Characterisation of Roselle & Kevlar hybrid composites”, in International Journal of Engineering and Advanced Technology (IJEAT) – SCOPUS INDEXED, ISSN: 2249–8958, Volume-9, Issue-2, December 2019.
  • Mr.P.V.Inbanaathan / Assistant Professor – III, Published a paper on “Characteristic Investigation on Di Diesel Engine With Nanoparticles as an Additive in Biodiesel” in SAE Technical Papers– SCOPUS INDEXED, October 2019.
  • Mr.V.Prabhu / Assistant Professor – III, Published a paper on “Comparative Analysis of Mechanical Properties in Aluminium Based Metal Matrix Composite” in TEST Engineering & Management magazine, ISSN: 0193-4120, Volume 83, Page No. 7480 – 7483, March – April 2020.
  • Dr.U.Tamilarasan / Head of the Department , Department of Production Engineering, Published a paper on “Micro Structural Analysis of Cryogenically Treated Carbon fibre Reinforced Epoxy Laminates and Aluminium”, Journal of Advanced Research in Dynamical and Control Systems (JARDCS) – SCOPUS INDEXED , ISSN : 1943-023X, Issue: 01-Special Issue, pp. 559-565, June 2018.
  • Mr.B.Senthilkumar / Assistant Professor – II, Department of Production Engineering, Published a paper on “Evaluation of Mechanical Properties of Kevlar Fibre Reinforced Aluminium 6061 Sandwich Composites”, International Journal of Engineering and Technology (UAE) – SCOPUS INDEXED ,ISSN:2227-524X, Pages 382-385, Vol 7, No 3.6 (2018) Special Issue 6, July 2018.
  • Mr.M.R.Ashok, Mr.P.V.Inbanaathan, Mr.M.Manojkumar / Assistant Professor – III, Department of Production Engineering, Published a paper on “flexural behavior of sandwich structure with AA8011 honeycomb core and Al 1100 Face skins”, International Journal of Vehicle Structures and Systems(IJVSS) – SCOPUS INDEXED ,Online ISSN:0975-3540, Vol 10, Issue No 6 (2018), December 2018.
  • Dr.U.Tamilarasan / Head of the Department, Published a paper on “Fertilizer Sprayer Using Bicycle” in THINK INDIA (Quarterly Journal), UGC Approved Journal , ISSN: 0971-1260 Vol-22-Issue-2-April-June2019.
  • Mr.V.Velmurugan / Assistant Professor – II, Published paper a titled “Productivity improvement in post casting process of die casting parts” in International journal of research and analytical reviews (IJRAR) , UGC Approved Journal , volume 6, issue 2, May 2019.
  • Mr. B.Senthilkumar / Assistant Professor – II, Published a paper on “Experimental Analysis of Commercial Vertical Axis Wind Turbine” in Journal of Emerging Technologies and Innovative Research (JETIR) – UGC Approved Journal, ISSN-2349-5162, pp. 534-542, Volume 6, Issue 5, May 2019.
  • Mr.M.R.Ashok / Assistant Professor – III, Published a paper on “Decarbonisation of Exhaust Gas from IC Engine” in Think India (Quarterly Journal)-UGC Approved Journal, Online ISSN0971-1260, Vol 22, Issue No 2, April-June-2019.
  • Mr.P.V.Inbanaathan / Assistant Professor – III, Published paper a titled “Experimental Investigation of HCCI Engine performance and emission characteristics using waste cooking oil and alumina as additive” in International journal of research and analytical reviews (IJRAR), UGC Approved Journal , (E-ISSN 2348-1269, P-ISSN 2349-5138), pp. 74-80,volume 6, issue 2, May 2019.
  • Mr.M.Manojkumar, Mr.P.V.Inbanaathan / Assistant Professor – III, Published paper a titled “Recent Trends in Mechanical Engineering” in INTERNATIONAL JOURNAL OF SCIENCE AND INNOVATIVE ENGINEERING TECHNOLOGY, UGC Approved Journal , ISBN 978-93-81288-18-4, pp. 74-80, ISSUE VOLUME 1, May 2019.
  • Mr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering, Published a paper on “Influence of Addition of Silicon on Mechanical Properties of Aluminum – Zinc alloy”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) – SCOPUS INDEXED, ISSN(Print) : 2249-6890, ISSN(Online) : 2249-8001, Vol. 8, pp. 113 – 120, April 2018.
  • Mr.S.Arunprasad / Assistant Professor – I, Department of Production Engineering, Published a paper on “Experimental investigation on the performance and emission characteristics of a diesel engine by varying the injection pressure and injection timing using mixed biodiesel”, International Journal of Green Energy, Taylor & Francics, Web of Science Indexed, Pages376-384, https://doi.org/10.1080/15435075.2018.1464923, April 2018.
  • Dr.U.Tamilarasan/Head of the Department, Published a paper on “Study of Mechanical Properties of Banana-Jute Fibre Epoxy Composite with Carbon Fibre” in International Journal of Engineering Research in Computer Science and Engineering (IJERCSE), UGC Approved Journal , ISSN (Online) 2394-2320,vol 5 Issue 3, Pages 942-952, March 2018.
  • Mr.S.Arunprasad / Assistant Professor – I, Published a paper on “Analysis and Reduction of surface defects in cars” in International Journal of Engineering Research in Computer Science and Engineering (IJERCSE), UGC Approved Journal , ISSN (Online) 2394-2320vol 5 Issue 3, Pages 953-955,March 2018.
  • Mr.M.Manojkumar / Assistant Professor – III, Department of Production Engineering, Published a paper on “Wear Characteristics of Hybrid Al 6063 Matrix Composites Reinforced with Graphite and Fly Ash Particulates”, Applied Mechanics and Materials (AMM), ISSN: 1662-7482, Vols.854, pp. 1 – 9, October 2016.
  • Dr.U.Tamilarasan / Head of the Department , Department of Production Engineering, Published a paper on “Mechanical Properties Evaluation of the Carbon Fibre Reinforced Aluminium Sandwich Composites”, Material Research bulletin, ISSN 0025-5408, Vol.18 No.5,pp. 1029–1037, October 2015.
  • Mr.D.Raguraman, Mr.D.Muruganandam and Mr.B.Senthilkumar / Assistant Professor , Department of Production Engineering, Published a paper on “Temperature Prediction using Finite Element Modeling on Friction Stir Welding of AA6061-AZ61”, Indian Journal of Science and Technology, ISSN (Print): 0974-6846, ISSN (Online): 0974-5645, Vol 8(31), IPL0686, November 2015.
  • Mr.D. Muruganandam / Assistant Professor, Department of Production Engineering, Published a paper on “Review Paper on Friction Stir Welding of Aluminium and Magnesium Alloys”, Indian Journal of Science and Technology, ISSN (Print): 0974-6846, ISSN (Online): 0974-5645, Vol 8(35), December 2015.
  • Dr.U.Tamilarasan / Head of the Department , Department of Production Engineering, Published a paper on “Tensile Property Evaluation of Carbon Fiber Reinforced Aluminium Sandwich Composites”, Advanced Materials Research (AMR), Vols. 984-985, pp. 345-349, July 2014.
  • Mr.S.Arunprasad, / Assistant Professor – I, Department of Production Engineering, Published a paper on “Optimization Of Performance Parameters of a C.I Engine Fueled With Neem Bio Diesel Using Taguchi Technique”, Advanced Materials Research (AMR), Vols. 984-985, pp. 867 – 872, July 2014.
  • Mr.S.Arunprasad, / Assistant Professor – I, Department of Production Engineering, Published a paper on “Performance and Emission Characteristics of a Mixed Biodiesel Fueled C.I Engine”, Applied Mechanics and Materials(AMM), Vols.766-767, pp. 557 – 561, February 2015.
  • Mr.S.Arunprasad, / Assistant Professor – I, Department of Production Engineering, Published a paper on “Influence of Compression ratio on C.I engine performance &Emission characteristics fueled by mixed biofuel”, International Journal of Applied Engineering Research, ISSN 0973-4562, Vols.10 No.50, 2015.
  • Mr.D.Muruganandam and Mr.B.Senthilkumar / Assistant Professor , Department of Production Engineering, Published a paper on “Effect of down time rate in friction stir welding of butt joint using embedded C programme”, International Journal of Pharmacy and Technology, 7(3), pp. 9898-9903, 2015.
  • Mr.D.Muruganandam, Mr.D.Raguraman and Mr.B.Senthilkumar / Assistant Professor , Department of Production Engineering, Published a paper on “FSW of Aluminium alloys – Energy model for taper tool geometry” , Elixir International Journal, Elixir Mech. Engg. 65 (2013), pp. 19864-19872, December 2013.
  • Mr.D.Muruganandam and Mr.D.Raguraman / Assistant Professor , Department of Production Engineering, Published a paper on “Analysis of Mechanical Strength Of Dissimilar aluminium Alloys AA7075 and AA2024 In Friction Stir Welding Using Taguchi’s Technique”, International journal of Research in Aeronautical and Mechanical Engineering , ISSN: 2321- 3051,Vol 1,Issue6, pp. 13- 22,October 2013.
  • Mr.D.Muruganandam and Mr.D.Raguraman / Assistant Professor , Department of Production Engineering, Published a paper on “Detection of Cracks in Friction Stir Weld of AA7075-AA2024 Using Morphological Edge Based Segmentation Techniques”, International Journal of Engineering Research & Technology (IJERT), ISSN: 2278- 0181,Vol. 2 Issue 12, December 2013.
  • Mr.D.Muruganandam/ Assistant Professor, Department of Production Engineering, Published a paper on “A Review On Friction Stir Welding of Dissimilar Aluminium alloys”, National Journal On Advances in Building Sciences and Mechanics, Vol .3 No.1, pp. 38-50, June 2012.